Converter 9V to 13.5kV

Converter 9V to 13.5kV schemeThis high voltage source is formed by an inverter, around the transistor, which provides pulses of 150V to the inverter formed by the thyristor and capacitor in series with the transformer 2. This pulse output of 4.5kV to be multiplied with the network so as to achieve the output voltage of 13.5kV.  Neon lamps (marked LN) form the thyristor triggering pulses.

The transformer T1 has a ratio 3000:500 Ω of the type used in audio output transistor. T2 is a transformer flash lamp trigger a secondary 6kV.
This converter circuit requires a 9VDC power supply with current 0.01A


Apply this equipment on the human body can cause serious physical injury to death. Don’t use in humans.

Power supply is an electronic device that supplies electric energy to an electrical load. The primary function of a power supply is to convert one form of electrical energy to another and, as a result, power supplies are sometimes referred to as electric power converters. Some power supplies are discrete, stand-alone devices, whereas others are built into larger devices along with their loads. Examples of the latter include power supplies found in desktop computers and consumer electronics devices.

Tags: 13.5kV inverter Converter 9V to 13.5kV dc to ac inverters high voltage inverter high voltage source voltage inverter

Related Post "Converter 9V to 13.5kV"

Converter 220V AC to 40kV AC
This device allows up to 40,000 volts
Converter 12 Vdc to 230 Vac or Inverter
As shown in the Inverter circuit diagram
12/220V Converter With Sine Output
How it work : The master oscillator,
Voltage Converter from 1.5V to 3V
A simple scheme to generate the inverter
  1. author

    matembo6 years ago

    bonjour je peu avoire de ja monter pour ce schema 9v to 13.5kv

  2. author

    Adelusi Tosin6 years ago

    Thanks very much for this power converter,sir pleased kindly explain one or two things on this schematic, secondly what are DC voltage measured for T1 and T2. What is the meaning of LN as it was show in this schematic? Thanks.