Simple Converter to Power UV Lamp

UV lamp converter

This simple converter to power UV lamp scheme is a simple converter to power the ultraviolet lamp low voltage. The power supply can be applied using the 6  batteries of 1.5V  or a power supply with an output current of at least 1 A / 8V voltage outout.

Parts list :
C1 : 0.0047 uF Ceramic capacitor
C2 : 0.1 uFDisc capacitor
D1, D2 : 1N4007 Rectifier
FTB : UV lamp discharge tube
IC1 : 555 Integrated timer
P1 : 10K Potentiometer
Q1 : TIP30 PNP power transistor conduction
R1 : 470 Ohm Resistor
R2 : 270 Ohm Resistor
T1 : Step-up transformer for medium-power inverter
Socket for chip, heat sink for the transistor Q1, screw, PCB

Note:
Potentiometer P1 can modify the intensity of UV luminescence.

Power supply is an electronic device that supplies electric energy to an electrical load. The primary function of a power supply is to convert one form of electrical energy to another and, as a result, power supplies are sometimes referred to as electric power converters. Some power supplies are discrete, stand-alone devices, whereas others are built into larger devices along with their loads. Examples of the latter include power supplies found in desktop computers and consumer electronics devices.


Tags: ultraviolet lamp power supply uv lamp converter uv lamp power supply UV lamp Simple converter

Related Post "Simple Converter to Power UV Lamp"

Voltage Doubler from 6VDC to 12VDC
This is the circuit diagram of voltage
24v to 12v converter
As shown, the 24v to 12v converter
12v to 24v converter
Is often you need to install some
Symmetric 12V to 5V converter
With this simple DC voltage converter circuit

Comments are closed.