-15 V 1-A Regulated Power Supply

-15 V 1-A Regulated Power Supply
The actual supply should get -20 V coming from rectifier/filter that is given to the collector of Darlington PNP-type pass transistor, a TIP 105. The base drive for the TIP105 is supplied  via resistor R5. The base of the TIP is driven from Vz terminal at pin 9, this is anode of 6.2 V zener diode which links with the emitter of uA 723 output control transistor. The way of providing the positive feedback needed for feedback action is

+15 Volt 1 Amp Regulated Power Supply

+15 Volt 1 Amp Regulated Power Supply
The actual supply takes +20 Volt Dc through the dioda bridge or filter part. This can be given to pins 11 and 12 on ua723, and also for the collector  2N3055 series-pass transistor. All the output voltage will be sampled through R1 and R2, giving around 7 Volt relating to ground at pin 4. The reference terminal at pin 6 is linked right to pin 5, the noninverting input of the error amplifier. (more…)