Voltage reducer 24V to 12 V at 2.5 A

Voltage reducer 24v to 12vThis circuit is a voltage reducer 24V to 12V with output current of 2.5 A, it can adapt in a various uses, it is suitable to be installed on a truck because of all the electrical circuits of car audio, radio and some other modern devices for cars require 12 volt supply voltage.

The use of this voltage reducer can also be expanded to the CB transmission / receiver, this is due to support of current 2.5 amps maximum.

LIST OF ELECTRONIC COMPONENTS:
All resistors are 1/4 watt unless otherwise specified.
R1 = 470 ohms 1 watt
C2 = 100uF16Velec.
DZ1 = 5 watt 13 volt zener.
T1 = 2N3055-BDW21C + heat sink

Power supply is an electronic device that supplies electric energy to an electrical load. The primary function of a power supply is to convert one form of electrical energy to another and, as a result, power supplies are sometimes referred to as electric power converters. Some power supplies are discrete, stand-alone devices, whereas others are built into larger devices along with their loads. Examples of the latter include power supplies found in desktop computers and consumer electronics devices.


Tags: 12v dc dc converter 24V to 12 V Voltage reducer voltage reducer 24V to 12V

Related Post "Voltage reducer 24V to 12 V at 2.5 A"

Converter 220V AC to 40kV AC
This device allows up to 40,000 volts
Car Battery Monitor with 3 LED
Car Battery Monitor circuit description: This is
Flashing battery monitor
Here is a simple battery monitor circuit in which

Comments are closed.