This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized voltage of +15V DC and -15VDC. The maximum current output is about 1 ampere up to 1.5 ampere refer to the datasheet. The circuit uses IC regulator LM7815 for positive voltage and LM7915 for negative voltage. To obtain different voltage output, just replace the IC regulator LM78xx and LM79xx, the xx code is the output DC voltage value.

Component List

  • Transformer: 1A center tap transformer with output 15 0 15 : 1
  • Diode 1A (1N4006 or 1N4007): 4
  • Electrolytic capacitor 4700uf/25V: 2
  • Nonpolar capacitor 1uF (100nF): 2
  • IC Regulator LM7815: 1
  • IC Regulator LM7915: 1

Notes:

  • You may add a fuse between mains to the transformer
  • You may add a LED indicator on the positive output and ground (series joint with resistor 470 ohm)

15V 1A Regulated Symmetrical Power Supply PCB Layout Design

That’s all, goodluck

psu

Share
Published by
psu

Recent Posts

Universal Battery Charger for Charging up to 18V Cell

This universal battery charger has regulated output voltage which can be adjusted as you need.…

5 years ago

Auto Switch-Off Power Supply (Variable Output 3.7V to 8.7V)

Here is the auto switch-off power supply which will turn off itself when there is…

6 years ago

High Voltage, Low Current Power Supply (2000VDC from 15VDC)

This is a high voltage, low current power supply capable to deliver 2000VDC output from…

6 years ago

12V / 3A Regulated Power Supply

Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…

7 years ago

How To Repair Computer Power Supply

If the power supply is damaged or does not work, the computer also will not…

7 years ago

Self Powered Battery Tester

This self powered battery tester circuit runs a fast battery test without the need of…

7 years ago