5V 10A 50W Offline Switching Power Supply

switching power supply

This is the switching power supply circuit diagram with 50W power output with a 5V voltage 10A current. It is a flyback converter operating in the continuous mode. The circuit features a primary side and secondary side controller will full-protection from fault conditions such as overcurrent.

After the fault condition has been removed, the power supply will enter the soft-start cycle before recommencing normal operation. Please be careful if you decide to build this circuit since  in thic circuit, there is a home electrical connection. Safety rules must be followed during circuit testing.

And here the circuit parts list:

switching power supply parts

Good luck…

Power supply is an electronic device that supplies electric energy to an electrical load. The primary function of a power supply is to convert one form of electrical energy to another and, as a result, power supplies are sometimes referred to as electric power converters. Some power supplies are discrete, stand-alone devices, whereas others are built into larger devices along with their loads. Examples of the latter include power supplies found in desktop computers and consumer electronics devices.

Tags: 10A switching 50W switching 5v power supply switching power supply

Related Post "5V 10A 50W Offline Switching Power Supply"

Isolated Feedback SMPS 5VDC 1.5A
Above schematic design is an isolated feedback
12V / 10A Switching Power Supply
This is the circuit diagram of 12V
Switch Mode Voltage Regulator with 85% efficiency
Switch Mode Power Supplies (SMPS) is now
Bipolar +/- 15V and 5V from Car Battery supply
This DC to DC Converter use Max

Comments are closed.