13.8V / 10A DC Regulator Circuit

This is a dc regulator circuit which will give output voltage of 13.8V with current output about 10A. The circuit use 4 pieces of power transistor 2N3055 to boost the electric current, to make the circuit capable to deliver 10A current output. It also use IC regulator 7812, change the IC type will give different output voltage value.

For 13.8VDC output voltage, you need the DC input voltage about 18VDC at least. Don’t forget to mount the heatsink on the power transistor and give good trace/cabling/wiring to the circuit especially for grounding connection.

13.8V / 10A DC regulator circuit source: http://sound.westhost.com/project77.htm

psu

Share
Published by
psu

Recent Posts

Universal Battery Charger for Charging up to 18V Cell

This universal battery charger has regulated output voltage which can be adjusted as you need.…

5 years ago

Auto Switch-Off Power Supply (Variable Output 3.7V to 8.7V)

Here is the auto switch-off power supply which will turn off itself when there is…

6 years ago

High Voltage, Low Current Power Supply (2000VDC from 15VDC)

This is a high voltage, low current power supply capable to deliver 2000VDC output from…

6 years ago

15V 1A Regulated Symmetrical Power Supply

This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…

7 years ago

12V / 3A Regulated Power Supply

Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…

7 years ago

How To Repair Computer Power Supply

If the power supply is damaged or does not work, the computer also will not…

7 years ago