Where 24 v input connector of the battery. 12V connector is the output and Gnd connector must be grounded. Of course, all the components (transistors and integrated) should be given with good heat dissipation and electrically insulated from the metal.
24v to 12v converter Adjustment :
Place the pot 10 k Ω at its maximum (fully open or 10 k Ω) and connect to the dc to dc converter output a lamp 12V / 50W. At the input connect the battery in series so the voltage is reached 24V. Place the output in parallel with the lamp tester a continuous scale with the right completion (around 50V). Begin to turn the potentiometer until the brightness of lights and tester showed 12V.
This universal battery charger has regulated output voltage which can be adjusted as you need.…
Here is the auto switch-off power supply which will turn off itself when there is…
This is a high voltage, low current power supply capable to deliver 2000VDC output from…
This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…
Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…
If the power supply is damaged or does not work, the computer also will not…