This DC to DC Converter use Max 541 from Maxim, IC1 is a switching regulator that generates a 45-kHz signal that drives the gate of MOSFET Q1 BUZ71A from Motorolla. The source of this power supply comes from a 12V car battery voltage. This DC to DC converter have an output +-15V and 5V.
D1, D2, and D3 are Schottky diodes. The 5 V output is sensed as a reference; feedback to the chip turns off the gate signal to Q1 if the voltage rises above 5 V.
T1 has Trifilar windings that assume about 2% regulation for a 10-to 100-mA load change on the ± 15-V supplies. R1/D4 provide overvoltage protection. T1 has a primary inductance of about 21 H. Core size should allow 4 A peak currents. The turn ratios are 111/2 turns each for the 15-V supplies, 111/2 turns for the primary, and four turns for the 5 V secondary. The efficiency is about 75%.
Parts list:
Capacitor
10uF/50V
0.1uF,50V
1uF 50V
100uF 25V (2)
100pF
470uF/5.3V
0.1uF (3)
Resistor
100 ohm 1/2W
100K 1%
300K 1%
1N5819 (2)
1N5821
Semiconductor
BUZ71A
MAX541
This universal battery charger has regulated output voltage which can be adjusted as you need.…
Here is the auto switch-off power supply which will turn off itself when there is…
This is a high voltage, low current power supply capable to deliver 2000VDC output from…
This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…
Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…
If the power supply is damaged or does not work, the computer also will not…