Categories: Battery Charger

Car Nicd Battery charger

This is a car nicd battery charger circuit that can charge any Ni-Cd battery between 4.8 and 4.4 volts from a classic 12 Volts car battery. The charging current is constant it can be selected from the values ​​of 50 to 120 mA by the selector S.

This feature is very useful for model making enthusiasts, for video operators, to those who use small appliances transmission and reception to all those that use Ni-Cd batteriesand need to recharge or voltage network is not available.

Car Nicd Battery charger Parts list :

All resistors are 1/4 watt unless otherwise stated.
R1 = 220Kohms
R2, R3 = 1 Kohm
R4 = 120 ohm 1 watt
R5 = 68 ohm 1 watt
CI = 10 nF ceramic.
C2 = 1000uF 16Velec.
C3 = 1000yF 25Velec.
D1 = 1N4001 … 7
D2 = 1N4001 … 7
D3 = 1N4001-7 …
T1 = BDX53
T2 = BDX53
IC1 = 4047
IC2 = 7805
S = 1 selector
3 Heatsinks
IC Support a 14-pin

 

psu

Share
Published by
psu

Recent Posts

Universal Battery Charger for Charging up to 18V Cell

This universal battery charger has regulated output voltage which can be adjusted as you need.…

5 years ago

Auto Switch-Off Power Supply (Variable Output 3.7V to 8.7V)

Here is the auto switch-off power supply which will turn off itself when there is…

6 years ago

High Voltage, Low Current Power Supply (2000VDC from 15VDC)

This is a high voltage, low current power supply capable to deliver 2000VDC output from…

6 years ago

15V 1A Regulated Symmetrical Power Supply

This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…

7 years ago

12V / 3A Regulated Power Supply

Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…

7 years ago

How To Repair Computer Power Supply

If the power supply is damaged or does not work, the computer also will not…

7 years ago