Categories: Battery Charger

Lithium Battery Charger

This Lithium battery charger circuit is dedicated to charge lithium batteries. It uses 2 chips, voltage regulator LM317T and ICL7665 warns microprocessors (μPs) of overvoltage and undervoltage conditions.

Charging is completed with a constant current of 60 ma for Aa cells to a cutoff voltage of 2.4 V per cell, at which point the charge should be terminated. The charging system shown is made for multi-cell lithium battery packs of two to six series-connected cells or series/parallel arrangements. It is important that all of the cells built in the pack are at an identical state-of-charge (voltage) before charging. The maximum upper cut-off voltage is 15.6 V (6 x 2.6 V).

psu

Share
Published by
psu

Recent Posts

Universal Battery Charger for Charging up to 18V Cell

This universal battery charger has regulated output voltage which can be adjusted as you need.…

5 years ago

Auto Switch-Off Power Supply (Variable Output 3.7V to 8.7V)

Here is the auto switch-off power supply which will turn off itself when there is…

6 years ago

High Voltage, Low Current Power Supply (2000VDC from 15VDC)

This is a high voltage, low current power supply capable to deliver 2000VDC output from…

6 years ago

15V 1A Regulated Symmetrical Power Supply

This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…

7 years ago

12V / 3A Regulated Power Supply

Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…

7 years ago

How To Repair Computer Power Supply

If the power supply is damaged or does not work, the computer also will not…

7 years ago