Power Supply for 25W Power Amplifier based MOSFET

The circuit diagram of unregulated power supply above is designed to supply a 25 watts power amplifier based MosFet. The output voltage of this power supply is ±33VDC.

Parts list :
R1:3K3  1/2W
C1:10nF 1000V Polyester Capacitor
C2,C3:4700µF   50V Electrolytic Capacitors
C4,C5:100nF   63V Polyester
D1:200V 8A Diode bridge
D2:5mm. Red
F1,F2:3.15A Fuses with
T1:220V Primary, 25 + 25V Secondary 120VA Mains
PL1:Male Mains
SW1:SPST Mains switch

The circuit diagram 25 watts power amplifier based MosFet can be found here.

psu

Share
Published by
psu

Recent Posts

Universal Battery Charger for Charging up to 18V Cell

This universal battery charger has regulated output voltage which can be adjusted as you need.…

5 years ago

Auto Switch-Off Power Supply (Variable Output 3.7V to 8.7V)

Here is the auto switch-off power supply which will turn off itself when there is…

6 years ago

High Voltage, Low Current Power Supply (2000VDC from 15VDC)

This is a high voltage, low current power supply capable to deliver 2000VDC output from…

6 years ago

15V 1A Regulated Symmetrical Power Supply

This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…

7 years ago

12V / 3A Regulated Power Supply

Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…

7 years ago

How To Repair Computer Power Supply

If the power supply is damaged or does not work, the computer also will not…

7 years ago