Power Supply source +5 Vdc +12 Vdc

This power supply circuit shows a steady source of continuous power supply combined with an output of +5 VDC and +12 VDC to ground, it is estimated for designing a current of about 900mA Max, enough to power any digital circuit with a relay output,that must be taken into account is the cascade design makes total consumption is the sum of the currents provided by the two outputs. Please note that the regulator should be equipped with a heat sink.

Dual power supply 5V & 12V parts list :
R1 : 1K
C1 : 330nF
C2 : 220uF
C3, C4 : 100uF
C5, C6 : 0.1uF
D1, D2 : 1N4007
D3 LED
U1 : 7812
U2 : 7805
Bridge diode

Features : Vin: 220 Vac, Vout: +5 v and +12 VDC, Imax: 900mA

psu

Share
Published by
psu

Recent Posts

Universal Battery Charger for Charging up to 18V Cell

This universal battery charger has regulated output voltage which can be adjusted as you need.…

5 years ago

Auto Switch-Off Power Supply (Variable Output 3.7V to 8.7V)

Here is the auto switch-off power supply which will turn off itself when there is…

6 years ago

High Voltage, Low Current Power Supply (2000VDC from 15VDC)

This is a high voltage, low current power supply capable to deliver 2000VDC output from…

6 years ago

15V 1A Regulated Symmetrical Power Supply

This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…

7 years ago

12V / 3A Regulated Power Supply

Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…

7 years ago

How To Repair Computer Power Supply

If the power supply is damaged or does not work, the computer also will not…

7 years ago