Categories: DC to DC Converter

Simple Converter to Power UV Lamp

This simple converter to power UV lamp scheme is a simple converter to power the ultraviolet lamp low voltage. The power supply can be applied using the 6  batteries of 1.5V  or a power supply with an output current of at least 1 A / 8V voltage outout.

Parts list :
C1 : 0.0047 uF Ceramic capacitor
C2 : 0.1 uFDisc capacitor
D1, D2 : 1N4007 Rectifier
FTB : UV lamp discharge tube
IC1 : 555 Integrated timer
P1 : 10K Potentiometer
Q1 : TIP30 PNP power transistor conduction
R1 : 470 Ohm Resistor
R2 : 270 Ohm Resistor
T1 : Step-up transformer for medium-power inverter
Socket for chip, heat sink for the transistor Q1, screw, PCB

Note:
Potentiometer P1 can modify the intensity of UV luminescence.

psu

Share
Published by
psu

Recent Posts

Universal Battery Charger for Charging up to 18V Cell

This universal battery charger has regulated output voltage which can be adjusted as you need.…

5 years ago

Auto Switch-Off Power Supply (Variable Output 3.7V to 8.7V)

Here is the auto switch-off power supply which will turn off itself when there is…

6 years ago

High Voltage, Low Current Power Supply (2000VDC from 15VDC)

This is a high voltage, low current power supply capable to deliver 2000VDC output from…

6 years ago

15V 1A Regulated Symmetrical Power Supply

This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…

7 years ago

12V / 3A Regulated Power Supply

Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…

7 years ago

How To Repair Computer Power Supply

If the power supply is damaged or does not work, the computer also will not…

7 years ago