Categories: DC to DC Converter

Voltage Doubler from 6VDC to 12VDC

This is the circuit diagram of voltage doubler, or it can be called DC to DC converter circuit, from 6 Volt DC become 12V DC. This dc voltage doubler circuit will need about 2A from the 6V input supply to produce the full 800mA at 12V for the power output.

Component Parts:
R1, R4 = 2.2K
R2, R3 = 4.7K
R5 = 1K
R6 = 1.5K
R7 = 33K
R8 = 10K
C1,C2 = 0.1uF C3 = 470uF/25V
D1 = 1N914
D2 = 1N4004
D3 = 12V 400mW Zener Diode
Q1, Q2, Q4 = BC547
Q3 = BD679
L1  is a custom inductor wound with about 80 turns of 0.5mm magnet wire around a toroidal core with a 40mm outside diameter.

Notes:

  • Different values of D3 can be used to get different output voltages from about 0.6V to around 30V. Note that at higher voltages the circuit might not perform as well and may not produce as much current. You may also need to use a larger C3 for higher voltages and/or higher currents.
  • You can use a larger value for capacitor C3 to provide better filtering.
psu

Share
Published by
psu

Recent Posts

Universal Battery Charger for Charging up to 18V Cell

This universal battery charger has regulated output voltage which can be adjusted as you need.…

5 years ago

Auto Switch-Off Power Supply (Variable Output 3.7V to 8.7V)

Here is the auto switch-off power supply which will turn off itself when there is…

6 years ago

High Voltage, Low Current Power Supply (2000VDC from 15VDC)

This is a high voltage, low current power supply capable to deliver 2000VDC output from…

6 years ago

15V 1A Regulated Symmetrical Power Supply

This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…

7 years ago

12V / 3A Regulated Power Supply

Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…

7 years ago

How To Repair Computer Power Supply

If the power supply is damaged or does not work, the computer also will not…

7 years ago