How it work :
The master oscillator, a voltage reference and comparator collected on DA2. External elements DD1 and DD2 repeated internal structure of the TL494, in the part that works is unstable at low frequencies (false positive D-flip-flop).
Further, using the low-pass filter suppresses the upper harmonics of the PWM. LPF consists of two parts. First-DA1.1, with a smooth lowpass characteristic curves. Second-DA1.2 notch filter with a frequency of 150 Hz suppression. The analysis shows that the PWM contains only odd harmonics of the first and, because such a filter is enough to form a “beautiful” sine (oscillogram 2). And, as the level of the first harmonic is almost linearly dependent on porosity, we obtain a well-managed with precision sine constant component equal to 2.5 V. Further, in addition we get the inverse sine (Pin 14 DA1.4).
In DA3, DA5, VT1, VT2 assembled the first channel of the VLF class D. The second channel, respectively, collected on DA4, DA7, VT3, VT4. At the output of the first and second channels are formed antiphase sine wave VLF (oscillogram 3).
The output of the transformer, a diode bridge fed on the feedback output voltage. Thus the output voltage stabilisator.
Specifications :
Input voltage 12 … 14V
output voltage 50 Hz 220 + /-2V
Max power 50W
Efficiency … 90%.
This universal battery charger has regulated output voltage which can be adjusted as you need.…
Here is the auto switch-off power supply which will turn off itself when there is…
This is a high voltage, low current power supply capable to deliver 2000VDC output from…
This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…
Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…
If the power supply is damaged or does not work, the computer also will not…