Categories: DC to DC Converter

Unipolar to Bipolar DC Converter 30V to ±15V

Maximum input voltage for this circuit is 30 volts . Thus, the output, we get ±15 Volts. current load – 1A .

The principle of the converter similar to a compensation voltage. DA1 exemplary chip compares the voltage to the noninverting input with resistor divider R1-R3 with the voltage coming to the inverting input from the output device. According to the corrected output signal, which regulates unlocking / locking of the output transistors. The maximum voltage is limited only by the supply voltage operational amplifier. A current output – set output transistors. Such is the useful thing.

Parts list :

Notation
Nominal
C1 100µF/25V
C2 100µF/25V
   
R1 510Ω
R3 510Ω
R2 1KΩ
R5 200Ω
R4 10KΩ
   
T1 KT815
T2 KT816
   
DA1 K140UD7
psu

Share
Published by
psu

Recent Posts

Universal Battery Charger for Charging up to 18V Cell

This universal battery charger has regulated output voltage which can be adjusted as you need.…

5 years ago

Auto Switch-Off Power Supply (Variable Output 3.7V to 8.7V)

Here is the auto switch-off power supply which will turn off itself when there is…

6 years ago

High Voltage, Low Current Power Supply (2000VDC from 15VDC)

This is a high voltage, low current power supply capable to deliver 2000VDC output from…

6 years ago

15V 1A Regulated Symmetrical Power Supply

This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…

7 years ago

12V / 3A Regulated Power Supply

Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…

7 years ago

How To Repair Computer Power Supply

If the power supply is damaged or does not work, the computer also will not…

7 years ago