Categories: Battery Charger

12Vdc mobile battery charger

12Vdc mobile battery charger circuit diagram can delivers up to 20 V output from the 12V car power supply, allowing a constant current charging to NiCad battery unit around 18 V max.

V1 forms a square wave oscillator, D1 and D2, coupling this square to supply 12-V battery to reach more than 20 VDC. If this is not necessary, S1 can be left open. Q1 form a current regulator to determine the charge level of rechargeable batteries. R4 is taken from a table or can be activated with a rotary selector switch. The following table is the value of R4 for charging various battery types :

Cell Size Amp/hr Rate R4 value (14 hr rate)
N 150 mA 120 ohms (a .25-watt
AA 500 mA  47 ohms @ .5 watt
C 1500 mA 12 ohms © .5 watt
D 1500 mA 12 ohms @ .5 watt
D (High capacity) 4000 mA 3.3 ohms @ 2 watt

Parts list :
R1 : 390K
R2 : 2.2M
R3 : 2.2K
R4 : 10 ohm
C1 : 1uF
C2, C3 : 220uF
D1,D2 : 1N4002
Q1 : 2N3055T
U1 : TDA2003
Led

psu

Share
Published by
psu

Recent Posts

Universal Battery Charger for Charging up to 18V Cell

This universal battery charger has regulated output voltage which can be adjusted as you need.…

5 years ago

Auto Switch-Off Power Supply (Variable Output 3.7V to 8.7V)

Here is the auto switch-off power supply which will turn off itself when there is…

6 years ago

High Voltage, Low Current Power Supply (2000VDC from 15VDC)

This is a high voltage, low current power supply capable to deliver 2000VDC output from…

6 years ago

15V 1A Regulated Symmetrical Power Supply

This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…

7 years ago

12V / 3A Regulated Power Supply

Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…

7 years ago

How To Repair Computer Power Supply

If the power supply is damaged or does not work, the computer also will not…

7 years ago