Categories: Battery Charger

5 A Stable Car Baterry Charger

This Battery Charger circuit  allows you to charge the battery 5A constant current source that stable over time between recharging.
Charging process is accompanied by the emission of diode D1 – AL310A, and D3-AL310B. IC A1 – 142EN2, Transistors: T1, T3 – KT815, T2 – KT819 (radiator), T4 – KT819. Zener: D2 – KS156, D3 – D814V. Resistors R4 and R5 is wound nichrome wire. 220V/15V transformer designed to power 100 W. Current leads (marked on the chart) must cross section of 0.5 mm2. The circuit is protected from short circuit the battery plates.
Parts list :
R1 : 100 ohm
R2 : 32 ohm
R3 : 1.2 K
R4 : 1 ohm
R5 : 0.16 ohm
R6 : Var 10 K
R7 : Var 2.4 K
R8 : 220 ohm
C1 : 20 uF
C2 : 0.1 uF
C3 : 0.1 uF
D1 : AL310A
D2 : Zener KS156
D3 : AL310B
D4 : Zener D814V
T1,T3 : KT815
T2 : KT819
IC A1 : 142EN2

 

 

psu

Share
Published by
psu

Recent Posts

Universal Battery Charger for Charging up to 18V Cell

This universal battery charger has regulated output voltage which can be adjusted as you need.…

5 years ago

Auto Switch-Off Power Supply (Variable Output 3.7V to 8.7V)

Here is the auto switch-off power supply which will turn off itself when there is…

6 years ago

High Voltage, Low Current Power Supply (2000VDC from 15VDC)

This is a high voltage, low current power supply capable to deliver 2000VDC output from…

6 years ago

15V 1A Regulated Symmetrical Power Supply

This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…

7 years ago

12V / 3A Regulated Power Supply

Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…

7 years ago

How To Repair Computer Power Supply

If the power supply is damaged or does not work, the computer also will not…

7 years ago