The actual supply should get -20 V coming from rectifier/filter that is given to the collector of Darlington PNP-type pass transistor, a TIP 105. The base drive for the TIP105 is supplied  via resistor R5. The base of the TIP is driven from Vz terminal at pin 9, this is anode of 6.2 V zener diode which links with the emitter of uA 723 output control transistor. The way of providing the positive feedback needed for feedback action is shown.

This method introduces positive feedback by raised current flow via resistors R1 and R2 under short-circuit conditions. This forward biases the base-emmiter junction of the 2N2907 sensing transistor. which will lowers base drive to the TIP 105. ( Texas Instrument,Linear and Interface Circuits Applications, Vol I )

psu

Share
Published by
psu

Recent Posts

Universal Battery Charger for Charging up to 18V Cell

This universal battery charger has regulated output voltage which can be adjusted as you need.…

5 years ago

Auto Switch-Off Power Supply (Variable Output 3.7V to 8.7V)

Here is the auto switch-off power supply which will turn off itself when there is…

6 years ago

High Voltage, Low Current Power Supply (2000VDC from 15VDC)

This is a high voltage, low current power supply capable to deliver 2000VDC output from…

6 years ago

15V 1A Regulated Symmetrical Power Supply

This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…

7 years ago

12V / 3A Regulated Power Supply

Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…

7 years ago

How To Repair Computer Power Supply

If the power supply is damaged or does not work, the computer also will not…

7 years ago