The actual supply takes +20 Volt Dc through the dioda bridge or filter part. This can be given to pins 11 and 12 on ua723, and also for the collector  2N3055 series-pass transistor. All the output voltage will be sampled through R1 and R2, giving around 7 Volt relating to ground at pin 4. The reference terminal at pin 6 is linked right to pin 5, the noninverting input of the error amplifier.

For nice trimming the output voltage, a potensiometer might be added among R1 and R2. A 100-pF capacitor right from pin 13 to pin 4 furnishes gain compensation for amplifier. ( Texas Instrument, Linear and Interface Circuit Applications, Vol. 1  )

psu

Share
Published by
psu

Recent Posts

Universal Battery Charger for Charging up to 18V Cell

This universal battery charger has regulated output voltage which can be adjusted as you need.…

5 years ago

Auto Switch-Off Power Supply (Variable Output 3.7V to 8.7V)

Here is the auto switch-off power supply which will turn off itself when there is…

6 years ago

High Voltage, Low Current Power Supply (2000VDC from 15VDC)

This is a high voltage, low current power supply capable to deliver 2000VDC output from…

6 years ago

15V 1A Regulated Symmetrical Power Supply

This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…

7 years ago

12V / 3A Regulated Power Supply

Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…

7 years ago

How To Repair Computer Power Supply

If the power supply is damaged or does not work, the computer also will not…

7 years ago