This is the switching power supply circuit diagram with 50W power output with a 5V voltage 10A current. It is a flyback converter operating in the continuous mode. The circuit features a primary side and secondary side controller will full-protection from fault conditions such as overcurrent.
After the fault condition has been removed, the power supply will enter the soft-start cycle before recommencing normal operation. Please be careful if you decide to build this circuit since in thic circuit, there is a home electrical connection. Safety rules must be followed during circuit testing.
And here the circuit parts list:
Good luck…
This universal battery charger has regulated output voltage which can be adjusted as you need.…
Here is the auto switch-off power supply which will turn off itself when there is…
This is a high voltage, low current power supply capable to deliver 2000VDC output from…
This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…
Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…
If the power supply is damaged or does not work, the computer also will not…
