Lithium Ion Battery Charger using Solar Cell Power Source

The above design diagram is the circuit diagram of Lithium-Ion battery charger which powered using solarcell / photovoltaic as the power source.

This electronic circuit feeds a controlled the current and 6V voltage from the solarcell to a 3.6v lithium ion battery. The current is limited to 300mA and the voltage is limited to 4.2 Volts. The circuit uses a LTC1734 IC manufactured by Linear Technology. No diode is needed between the circuit and a 6 volt solar panel because the output power from solarcell already in DC form. Their SP6-200-12 cranks out about 1 watt while the SP6-300-12 can produce about 2 watts. Assuming that this circuit activated in a 6 hour sunlight day, the 2 watt panel will deviver about 1.8 amp-hours into a lithium ion battery.

psu

Share
Published by
psu

Recent Posts

Universal Battery Charger for Charging up to 18V Cell

This universal battery charger has regulated output voltage which can be adjusted as you need.…

5 years ago

Auto Switch-Off Power Supply (Variable Output 3.7V to 8.7V)

Here is the auto switch-off power supply which will turn off itself when there is…

6 years ago

High Voltage, Low Current Power Supply (2000VDC from 15VDC)

This is a high voltage, low current power supply capable to deliver 2000VDC output from…

6 years ago

15V 1A Regulated Symmetrical Power Supply

This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…

7 years ago

12V / 3A Regulated Power Supply

Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…

7 years ago

How To Repair Computer Power Supply

If the power supply is damaged or does not work, the computer also will not…

7 years ago