6.8 Volt Transformerless Power Supply.

Quite a simple power supply unit can be built for half an hour.

The scheme is designed for voltage and current of 6.8 V 300mA. The voltage can be changed by replacing the Zener D4 and, if necessary, D3. A setting on the radiators of transistors can be increased and the load current.
Diode bridge – any, is nice and a reverse voltage of at least 400 volts. By the way, we can recall the ancient and diode D226B, once terribly popular.

WARNING!
Scheme is not galvanically isolated from the AC, so when its assembly, setup and use, you must be extremely cautious.

Parts list :
R1 : 4K7
R2 : 5K6
R3 : 3K9
C1 : 1000uF/10V
D1 : KU405B
D2 : KC650A
D3 : D817B
D4 : KC168
T1 : KT940A
T2, T3 : KT815
psu

Share
Published by
psu

Recent Posts

Universal Battery Charger for Charging up to 18V Cell

This universal battery charger has regulated output voltage which can be adjusted as you need.…

5 years ago

Auto Switch-Off Power Supply (Variable Output 3.7V to 8.7V)

Here is the auto switch-off power supply which will turn off itself when there is…

6 years ago

High Voltage, Low Current Power Supply (2000VDC from 15VDC)

This is a high voltage, low current power supply capable to deliver 2000VDC output from…

6 years ago

15V 1A Regulated Symmetrical Power Supply

This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…

7 years ago

12V / 3A Regulated Power Supply

Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…

7 years ago

How To Repair Computer Power Supply

If the power supply is damaged or does not work, the computer also will not…

7 years ago