Categories: Regulated Power Supply

Low Power Bipolar Stabilizer

The stabilizer is made ​​on the integrated circuit KR142EN6. IC is a bipolar voltage regulator with an output voltage of + / -15 V. Maximum load current is 200 mA. Enough to supply a pre-amplifier or the early stages of the power amplifier.
Diode bridge – any of a series of KTS407, KTS405, KTS402.
Transformer with two secondary windings, the voltage on each – 16 Volt.

Parts list :
C1, C2 : 1000uF/25V
C4, C5 : 1000
C3, C6 : 33uF/25V
D1 : KTS407, KTS405, KTS402
IC1 : KR142EN6
psu

Share
Published by
psu
Tags: +15V -15V power supplybipolar power supplybipolar stabilizerlow power stabilizer
12 years ago

Recent Posts

Universal Battery Charger for Charging up to 18V Cell

This universal battery charger has regulated output voltage which can be adjusted as you need.…

5 years ago

Auto Switch-Off Power Supply (Variable Output 3.7V to 8.7V)

Here is the auto switch-off power supply which will turn off itself when there is…

6 years ago

High Voltage, Low Current Power Supply (2000VDC from 15VDC)

This is a high voltage, low current power supply capable to deliver 2000VDC output from…

6 years ago

15V 1A Regulated Symmetrical Power Supply

This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…

7 years ago

12V / 3A Regulated Power Supply

Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…

7 years ago

How To Repair Computer Power Supply

If the power supply is damaged or does not work, the computer also will not…

7 years ago