A simple 9 Volt 2 amp power supply using a single IC regulator.

This is very simple circuit. Everything is done by the regulator. The 78S09 can provide up to 2 amps continuous output while maintaining a low noise and very nicely regulated supply.

The schematic will work with no extra parts, however for reverse polarity protection a 1N5400 diode is provided within the input, additional smoothing being supplied by C1. The output stage includes C2 for extra filtering, if driving a logic circuit over a 100nF capacitor is also desirable to reduce any kind of high frequency switching noise.

psu

Share
Published by
psu

Recent Posts

Universal Battery Charger for Charging up to 18V Cell

This universal battery charger has regulated output voltage which can be adjusted as you need.…

5 years ago

Auto Switch-Off Power Supply (Variable Output 3.7V to 8.7V)

Here is the auto switch-off power supply which will turn off itself when there is…

6 years ago

High Voltage, Low Current Power Supply (2000VDC from 15VDC)

This is a high voltage, low current power supply capable to deliver 2000VDC output from…

6 years ago

15V 1A Regulated Symmetrical Power Supply

This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…

7 years ago

12V / 3A Regulated Power Supply

Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…

7 years ago

How To Repair Computer Power Supply

If the power supply is damaged or does not work, the computer also will not…

7 years ago