This is simple VCO ( voltage controlled oscillator) circuit , connected to your current instrumentation by an optoisolator, means that you can measure high voltages of your instrumentation more secure. The component values suit a 0 to 600 V input range (power dissipation in R1 and R2 set a limit on the input-voltage range). The circuit’s linearity is not an issue, because you can linearize its output in software.
The input voltage (VI), charges capacitor C1 until zener diode D1 conducts. Then, the zener diode triggers an “avalanche” circuit that discharges C1 into optocoupler Q1. After Cl discharges, the charging cycle repeats. C1 also averages the sensed-voltage level, which thereby provides noise immunity.
The optocoupler’s output is a pulse train whose frequency increases with increasing input voltage. To develop a linearizing equation for the circuit, measure its output at two convenient, widely spaced input voltages. Then plug the resulting periods into this second-order polynomial approximation and solve the two simultaneous equations for the two constants, k, and k2 :
V2 is zener voltage of D1.
Parts list :
R1,R2 : 82K (1/2W)
R3 : 1M
R4 : 1K
R5 : 200
R6 :100K
C1 : 3,3uF
C2 : 470pF
L1 : 10uH
D1 : 1N4691 (6V2)
D2 : 1N4148
T1 : BC557B
T2 : BC547B
Optocoupler : 6N135, 6N136, or 6N137
This universal battery charger has regulated output voltage which can be adjusted as you need.…
Here is the auto switch-off power supply which will turn off itself when there is…
This is a high voltage, low current power supply capable to deliver 2000VDC output from…
This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…
Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…
If the power supply is damaged or does not work, the computer also will not…