Categories: DC to DC Converter

Simple 12 Volt to 9 Volt DC-DC Converter


12 V to 9 V DC-DC Converter

This DC-DC Converter schematic diagram is very simple with few components, making it easy to build. It can convert 9 volt DC voltage from 12 VDC source.

To obtain a much more accurate output voltage, change zener Z1 using 10V and resistor R1 with a 1 Kohm Variable resistor. A heatsink for Q1 is recommended. Very simple circuit to be able to power your 9 volt electronic equipment and some other stuff.

Parts List :
R1 = 560 ohm
C1 = 1000µF/16V ( Electrolytic Capacitor )
C2 = 100µF/16 ( Electrolytic Capacitor )
C3 = 330nF ( Ceramic Capacitor )
Z1 = 9.1V, 0.4 watt ( zener diode )
Q1 = ECG184, NTE184

psu

Share
Published by
psu

Recent Posts

Universal Battery Charger for Charging up to 18V Cell

This universal battery charger has regulated output voltage which can be adjusted as you need.…

5 years ago

Auto Switch-Off Power Supply (Variable Output 3.7V to 8.7V)

Here is the auto switch-off power supply which will turn off itself when there is…

6 years ago

High Voltage, Low Current Power Supply (2000VDC from 15VDC)

This is a high voltage, low current power supply capable to deliver 2000VDC output from…

6 years ago

15V 1A Regulated Symmetrical Power Supply

This is the easy built 15V 1A regulated symmetrical power supply capable to deliver stabilized…

7 years ago

12V / 3A Regulated Power Supply

Here we provide a powerful 12V / 3A regulated power supply circuit. Of course the…

7 years ago

How To Repair Computer Power Supply

If the power supply is damaged or does not work, the computer also will not…

7 years ago